Your search criteria
Available options: Audio in: Analog 1/8"
found following products (187):
The Eurorack standard 4-channel sequencer, which has a classic drum machine interface, allows you to intuitively immerse yourself in creating drum parts, changing the settings of patterns and effects in real time without having to stop the sequence for...
Pittsburgh Modular M3 Mult Audio and Control Voltage Signal Router 69.00 U.S.Dollars
Three convenient mini modules enclosed in one housing. In the upper part is a passive signal propagator. It is represented with four parallel connectors, which allow you to send one signal assigning it into three routings. In the middle and bottom part...
Analog delay module, built on two chips 4096 BBD (Bucket Brigade Delay line). It is the predecessor of Analog Replicator. Rate sets the delay time, FBK - the feedback intensity, DRY - the volume of the original signal at the output, WET - the value...
Verbtronic is a digital mono echo effect. It has two modes of operation: "verb" and "tronic". Verb creates a short echo with a small number of reflections. Tronic is a specific long soaring echo effect. The "tonal tilt" control is a kind of equalizer...
The module is designed for routing and mixing audio and/or control signals. Each of the four channels can be manually switched by the on/off switch or by the control signal received by the Gate In. The signal sent to the input can be sent to bus A and/or...
The Phase Shifter module is an analogue 16-step phaser. In addition to the output at the sixteenth stage, there’s another mix (dry/wet) is provided after the eight one. In addition, there are outputs after the seventh and fifteenth steps which allow no...
Pittsburgh Modular Outs Stereo Headphone Amp and Line Outs 99.00 U.S.Dollars
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).
Mix Mult consists of two functional units: a three-channel mixer and two signal multipliers. Each mixer channel has its own gain control. Channels 1 and 2 have independent outputs with the function of disconnecting from the mixer, which allows them to be...
The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...
